[Diy_efi] OL operation - How lean at cruise?
Daniel R. Nicoson
A6intruder at myo-p.com
Wed Mar 30 09:20:25 CST 2005
I'm back to tuning my 1994 Mustang GT, snow is gone, the daily driver, an
"ultimate driving machine" isn't as reliable as this old Mustang (BMW
currently apart in my garage awaiting parts). So I'm driving the Mustang.
I don't have a very good tune going right now, sucking lots of expensive gas
( I drive about 45 miles each day). So I decided to run Open Loop full time
and try to run pretty lean at low LOAD levels (no cats to worry about right
I'm just curious what others have found to be good AFR for highway cruise
and around town. I plugged in a program last night that commands about
AFR=15.5 at these conditions. Seems to run fairly smooth down the highway.
My combination is a stock bottom end, AFR-165 heads, cam is really just a
high lift version of the stocker, nothing really wild.
More information about the Diy_efi