[Diy_efi] Fuel injector part number
niche at iinet.net.au
Thu Sep 29 23:26:40 CDT 2005
That number looks familiar but I cant pin it down,
do you have a multimeter - whats the resistance of the coil ?
And are the side or top feed ?
Perth, Western Australia
VL Commodore Fuse Rail that wont warp or melt !
Twin tyres for most sedans, trikes and motorcycle sidecars
At 10:08 AM 9/30/05, you wrote:
>I scored a bunch of fuel injectors from a late model Mitsubishi V-6. The
>engine wasn't with the injectors, this was at a swap meet. There is a Bosch
>type number on the injectors, but a Google search didn't find any. There is
>a Chrysler star on the injector. The number is:
>0 280 156 036 also 04591756AB
>I want to know what the flow rate is through the injector, primarily.
>Whether it is a peak and hold would be nice.
More information about the Diy_efi