[Diy_efi] circuit and PCB proofreaders?
bernie at innovative.iinet.net.au
Tue Apr 11 09:36:22 CDT 2006
On Tuesday 11 April 2006 12:07, Steve Ravet wrote:
> I've created a PCB using Eagle PCB software. Before I send it off
> I'd appreciate some comments, especially on the PCB and any issues
> that may affect reliability or manufacturability. I have gifs of
> the schematic and the PCB on the FTP site:
> This is a USB to VPW converter, that will allow connecting a PC to
> a GM OBD2 computer via the USB port. It will work for scan tool
> operations or reflashing operations.
First thing that struck me was the number of vias. You've probably
played around a bit with component placement and routes but I simply
have an aversion to vias because of the plated-thru holes sometimes
not being plated all the way through.
/"\ Bernd Felsche - Innovative Reckoning, Perth, Western Australia
\ / ASCII ribbon campaign | "Laws do not persuade just because
X against HTML mail | they threaten."
/ \ and postings | Lucius Annaeus Seneca, c. 4BC - 65AD.
More information about the Diy_efi