From tmc_mike_yates at sbcglobal.net  Tue May  1 09:19:39 2007
From: tmc_mike_yates at sbcglobal.net (Mike Yates)
Date: Tue, 01 May 2007 07:19:39 -0700
Subject: [Diy_efi] Autoprom for sale
In-Reply-To: <000001c78b9a$37fb77c0$6e01a8c0@chris>
References: <000001c78b9a$37fb77c0$6e01a8c0@chris>
Message-ID: <t2je33d7qil19lhilu4nj7gea8g2i8o3ba@4ax.com>

ill take the LC1 please contact off list for prefered payment
\
Mike

On Mon, 30 Apr 2007 21:41:27 -0500, you wrote:

>I have for sale a used Autoprom1, APU1 Bluetooth adapter and a LC1.
>
> 
>
>1st: The autoprom is in great working order I just no longer need it. I
>should have gone a different route. Any way I am asking $275 for the used
>APU1, ALDL cable, USB cable, software CD and 2-512k chips
>
> 
>
>2nd: I have the bluetooth adapter so you can go wireless from the laptop to
>the APU1. I would like to get $50 for it.
>
> 
>
>3rd: Innovative Motorsports LC1 w/ WBO2 sensor. The sensor have never been
>used. The harness was installed in the car but never hooked up. It does NOT
>come with a bung. I used it  :)  I would like $175 for it.  
>
> 
>
>If some one would like to purchase all of these items at once I would make a
>deal at $475. All of these prices do include shipping. If you have any
>questions please ask.
>
> 
>
>Chris
>
> 
>
>Email me privately & I can send photos and answer questions you may have.
>
> 
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi



From cwrxr at earthlink.net  Fri May 18 18:00:57 2007
From: cwrxr at earthlink.net (Curtis Richards)
Date: Fri, 18 May 2007 19:00:57 -0400
Subject: [Diy_efi] is the list down or just quiet?
Message-ID: <464E3029.7040007@earthlink.net>

Hi  all,

Haven't seen any activity on the list for a while.  I hope that means 
everybody is out racing!

-- 

Curtis W Richards

--

"The propriety of a law, in a constitutional light, must always be
deteremined by the nature of the powers upon which it is founded."

-- Alexander Hamilton (Federalist No. 33, 3 January 1788)




From steve at donegan.org  Sat May 19 09:04:28 2007
From: steve at donegan.org (Steven P. Donegan)
Date: Sat, 19 May 2007 07:04:28 -0700
Subject: [Diy_efi] is the list down or just quiet?
In-Reply-To: <464E3029.7040007@earthlink.net>
References: <464E3029.7040007@earthlink.net>
Message-ID: <1179583468.436.0.camel@wopr.donegan.org>

You are correct :-) Been doing testing days on my new vehicle :-)

On Fri, 2007-05-18 at 19:00 -0400, Curtis Richards wrote:
> Hi  all,
> 
> Haven't seen any activity on the list for a while.  I hope that means 
> everybody is out racing!
> 



From jimbutterfield at yahoo.com  Sat May 19 09:30:17 2007
From: jimbutterfield at yahoo.com (Jim Butterfield)
Date: Sat, 19 May 2007 07:30:17 -0700 (PDT)
Subject: [Diy_efi] is the list down or just quiet?
In-Reply-To: <464E3029.7040007@earthlink.net>
Message-ID: <338226.34965.qm@web36706.mail.mud.yahoo.com>

No Curtis... still working, just noprojects or issues for people...
   
  jim
  

Curtis Richards <cwrxr at earthlink.net> wrote:
  Hi all,

Haven't seen any activity on the list for a while. I hope that means 
everybody is out racing!

-- 

Curtis W Richards

--

"The propriety of a law, in a constitutional light, must always be
deteremined by the nature of the powers upon which it is founded."

-- Alexander Hamilton (Federalist No. 33, 3 January 1788)


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page: http://www.diy-efi.org/diy_efi


 
---------------------------------
Don't pick lemons.
See all the new 2007 cars at Yahoo! Autos.

From don.broadus at exeloncorp.com  Mon May 21 09:58:12 2007
From: don.broadus at exeloncorp.com (don.broadus at exeloncorp.com)
Date: Mon, 21 May 2007 09:58:12 -0500
Subject: [Diy_efi] is the list down or just quiet?
In-Reply-To: <464E3029.7040007@earthlink.net>
Message-ID: <F4F253665838734F841C5B2C63B72F9486602E@CCCMSXCH01.energy.power.corp>

Bonneville Speed week is only 81 days away. Everyone must be thrashing to get the car ready.








-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Curtis Richards
Sent: Friday, May 18, 2007 6:01 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] is the list down or just quiet?


Hi  all,

Haven't seen any activity on the list for a while.  I hope that means 
everybody is out racing!

-- 

Curtis W Richards

--

"The propriety of a law, in a constitutional light, must always be
deteremined by the nature of the powers upon which it is founded."

-- Alexander Hamilton (Federalist No. 33, 3 January 1788)


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi

-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies.
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************



From tmc_mike_yates at sbcglobal.net  Mon May 21 13:52:15 2007
From: tmc_mike_yates at sbcglobal.net (Mike Yates)
Date: Mon, 21 May 2007 11:52:15 -0700
Subject: [Diy_efi] is the list down or just quiet?
In-Reply-To: <F4F253665838734F841C5B2C63B72F9486602E@CCCMSXCH01.energy.power.corp>
References: <464E3029.7040007@earthlink.net>
	<F4F253665838734F841C5B2C63B72F9486602E@CCCMSXCH01.energy.power.corp>
Message-ID: <qfq353ll6u4d8b9sfnij32jsck83c3ql1a@4ax.com>

I'm waiting on new toys to arrive, Then i'll have more stupid
questions than...I usually do...

NIStune mayvery well save my project....check it out if you are
looking for a replacement for romedit or livetune on nissan ecu's

Mike


On Mon, 21 May 2007 09:58:12 -0500, you wrote:

>Bonneville Speed week is only 81 days away. Everyone must be thrashing to get the car ready.
>
>
>
>
>
>
>
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Curtis Richards
>Sent: Friday, May 18, 2007 6:01 PM
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] is the list down or just quiet?
>
>
>Hi  all,
>
>Haven't seen any activity on the list for a while.  I hope that means 
>everybody is out racing!
>
>-- 
>
>Curtis W Richards



From jimbutterfield at yahoo.com  Tue May 22 00:01:38 2007
From: jimbutterfield at yahoo.com (Jim Butterfield)
Date: Mon, 21 May 2007 22:01:38 -0700 (PDT)
Subject: [Diy_efi] is the list down or just quiet?
In-Reply-To: <F4F253665838734F841C5B2C63B72F9486602E@CCCMSXCH01.energy.power.corp>
Message-ID: <762266.64043.qm@web36708.mail.mud.yahoo.com>

Never heard of this... will it be on TV or will ESPN2 pull it in the lasst minute as they did last weekend with drag racing??? ARRRRRRR

jim

don.broadus at exeloncorp.com wrote: Bonneville Speed week is only 81 days away. Everyone must be thrashing to get the car ready.








-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Curtis Richards
Sent: Friday, May 18, 2007 6:01 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] is the list down or just quiet?


Hi  all,

Haven't seen any activity on the list for a while.  I hope that means 
everybody is out racing!

-- 

Curtis W Richards

--

"The propriety of a law, in a constitutional light, must always be
deteremined by the nature of the powers upon which it is founded."

-- Alexander Hamilton (Federalist No. 33, 3 January 1788)


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi

-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies.
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


       
---------------------------------
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.

From don.broadus at exeloncorp.com  Tue May 22 08:29:07 2007
From: don.broadus at exeloncorp.com (don.broadus at exeloncorp.com)
Date: Tue, 22 May 2007 08:29:07 -0500
Subject: [Diy_efi] is the list down or just quiet?
In-Reply-To: <762266.64043.qm@web36708.mail.mud.yahoo.com>
Message-ID: <F4F253665838734F841C5B2C63B72F94866030@CCCMSXCH01.energy.power.corp>

I don't know if anyone will be covering The Bonneville salt Flats Speed Week Aug 11-17 But I will be there. First time at the Flats, going to be great.










-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Jim Butterfield
Sent: Tuesday, May 22, 2007 12:02 AM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] is the list down or just quiet?


Never heard of this... will it be on TV or will ESPN2 pull it in the lasst minute as they did last weekend with drag racing??? ARRRRRRR

jim

don.broadus at exeloncorp.com wrote: Bonneville Speed week is only 81 days away. Everyone must be thrashing to get the car ready.








-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Curtis Richards
Sent: Friday, May 18, 2007 6:01 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] is the list down or just quiet?


Hi  all,

Haven't seen any activity on the list for a while.  I hope that means 
everybody is out racing!

-- 

Curtis W Richards

--

"The propriety of a law, in a constitutional light, must always be
deteremined by the nature of the powers upon which it is founded."

-- Alexander Hamilton (Federalist No. 33, 3 January 1788)


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi

-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies.
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


       
---------------------------------
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


From donegan at donegan.org  Tue May 22 08:35:15 2007
From: donegan at donegan.org (Steven Donegan)
Date: Tue, 22 May 2007 06:35:15 -0700 (PDT)
Subject: [Diy_efi] is the list down or just quiet?
In-Reply-To: <qfq353ll6u4d8b9sfnij32jsck83c3ql1a@4ax.com>
Message-ID: <349116.20681.qm@web808.biz.mail.mud.yahoo.com>

Which Nissan - I finally sold my Z28 and bought a 350Z (2007 with new 306 HP HR motor - apparently it has a unique ECU). 

From niche at iinet.net.au  Tue May 22 09:26:28 2007
From: niche at iinet.net.au (Mike)
Date: Tue, 22 May 2007 22:26:28 +0800
Subject: [Diy_efi] is the list down or just quiet?
In-Reply-To: <464E3029.7040007@earthlink.net>
References: <464E3029.7040007@earthlink.net>
Message-ID: <7.0.1.0.0.20070522222504.02769450@iinet.net.au>>

At 07:00 AM 5/19/07, you wrote:
>Hi  all,
>
>Haven't seen any activity on the list for a while.  I hope that means everybody is out racing!

people seem to want to race me on the streets, my funny twin tyres sticking out the back 
attract attention ;)





Regards from


Mike Massen
Network Power Systems
Lab 08 9444 8961
Mb 0438 048961
Perth, Western Australia
* VL/VK & VN/VP/VR GMH Commodore Fuse Rail that wont warp or melt !
* RB30 Skyline/Nissan/VL Milspec ignition drivers with diagnostic features now in economy trials
* Twin tyres for most sedans, trikes and motorcycle sidecars
* Industrial grade PolyVinyliDeneChloride (PVDC Copolymer) in bulk, the best
  oxygen and water protective barrier you can find for circuit boards.
* Special equipment on offer, 60KVA UPS with large battery cabinet - AUD$12K
Web site under construction   http://niche.iinet.net.au


From ebuckler at icehouse.net  Tue May 22 10:37:34 2007
From: ebuckler at icehouse.net (Ernest Buckler)
Date: Tue, 22 May 2007 08:37:34 -0700
Subject: [Diy_efi] OT - ? Twin Tires
References: <464E3029.7040007@earthlink.net>
	<7.0.1.0.0.20070522222504.02769450@iinet.net.au>>
Message-ID: <000e01c79c87$1f00e9a0$0300a8c0@userc276844d8d>

Mike,
Since the list is so quiet anyway, maybe have time for an off-topic 
diversion: What're these "twin tires sticking out the back", of which you 
speak?

Also, do you sell the PVDC in home board-builder size containers?  How 
applied? Thanks.

Ernest Buckler


,
>>
>>Haven't seen any activity on the list for a while.  I hope that means 
>>everybody is out racing!
>
> people seem to want to race me on the streets, my funny twin tyres 
> sticking out the back
> attract attention ;)
> 



From ebuckler at icehouse.net  Tue May 22 11:48:24 2007
From: ebuckler at icehouse.net (Ernest Buckler)
Date: Tue, 22 May 2007 09:48:24 -0700
Subject: [Diy_efi] Sunscreen tips of Bonneville
References: <F4F253665838734F841C5B2C63B72F94866030@CCCMSXCH01.energy.power.corp>
Message-ID: <004101c79c91$037be270$0300a8c0@userc276844d8d>

Don,
You probably have had tons of advice re sunscreen at Bonneville, but just in 
case: One point that gets overlooked is to also apply sunscreen to areas 
subject to REFLECTED sunlight, places where we ordinarily never get burned - 
guys get sunburned under their arms, under their nose & chin, bottom of 
ears, etc.   And, um, baggy shorts with no underwear...? Can be V. V. bad. 
You get the message.  [:oj
Ernie




----- Original Message ----- 
From: <don.broadus at exeloncorp.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, May 22, 2007 6:29 AM
Subject: RE: [Diy_efi] is the list down or just quiet?


I don't know if anyone will be covering The Bonneville salt Flats Speed Week 
Aug 11-17 But I will be there. First time at the Flats, going to be great.










-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Jim Butterfield
Sent: Tuesday, May 22, 2007 12:02 AM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] is the list down or just quiet?


Never heard of this... will it be on TV or will ESPN2 pull it in the lasst 
minute as they did last weekend with drag racing??? ARRRRRRR

jim

don.broadus at exeloncorp.com wrote: Bonneville Speed week is only 81 days 
away. Everyone must be thrashing to get the car ready.








-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Curtis Richards
Sent: Friday, May 18, 2007 6:01 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] is the list down or just quiet?


Hi  all,

Haven't seen any activity on the list for a while.  I hope that means
everybody is out racing!

-- 

Curtis W Richards

--

"The propriety of a law, in a constitutional light, must always be
deteremined by the nature of the powers upon which it is founded."

-- Alexander Hamilton (Federalist No. 33, 3 January 1788)


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi

-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies.
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi



---------------------------------
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007 
2:01 PM




From don.broadus at exeloncorp.com  Tue May 22 13:05:40 2007
From: don.broadus at exeloncorp.com (don.broadus at exeloncorp.com)
Date: Tue, 22 May 2007 13:05:40 -0500
Subject: [Diy_efi] Sunscreen tips of Bonneville
In-Reply-To: <004101c79c91$037be270$0300a8c0@userc276844d8d>
Message-ID: <F4F253665838734F841C5B2C63B72F94866034@CCCMSXCH01.energy.power.corp>

Thanks  Ernie,  I welcome all advice for my first Trip to the Salt. Will be flying in to Salt Lake City and driving to the Flats. Gonna pick up a Bike to roam around the pits. Plan on looking up any list members that will be there. Thanks for the sunscreen info.    Don 



-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Ernest Buckler
Sent: Tuesday, May 22, 2007 11:48 AM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] Sunscreen tips of Bonneville


Don,
You probably have had tons of advice re sunscreen at Bonneville, but just in 
case: One point that gets overlooked is to also apply sunscreen to areas 
subject to REFLECTED sunlight, places where we ordinarily never get burned - 
guys get sunburned under their arms, under their nose & chin, bottom of 
ears, etc.   And, um, baggy shorts with no underwear...? Can be V. V. bad. 
You get the message.  [:oj
Ernie




----- Original Message ----- 
From: <don.broadus at exeloncorp.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, May 22, 2007 6:29 AM
Subject: RE: [Diy_efi] is the list down or just quiet?


I don't know if anyone will be covering The Bonneville salt Flats Speed Week 
Aug 11-17 But I will be there. First time at the Flats, going to be great.










-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Jim Butterfield
Sent: Tuesday, May 22, 2007 12:02 AM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] is the list down or just quiet?


Never heard of this... will it be on TV or will ESPN2 pull it in the lasst 
minute as they did last weekend with drag racing??? ARRRRRRR

jim

don.broadus at exeloncorp.com wrote: Bonneville Speed week is only 81 days 
away. Everyone must be thrashing to get the car ready.








-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Curtis Richards
Sent: Friday, May 18, 2007 6:01 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] is the list down or just quiet?


Hi  all,

Haven't seen any activity on the list for a while.  I hope that means
everybody is out racing!

-- 

Curtis W Richards

--

"The propriety of a law, in a constitutional light, must always be
deteremined by the nature of the powers upon which it is founded."

-- Alexander Hamilton (Federalist No. 33, 3 January 1788)


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi

-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies.
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi



---------------------------------
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007 
2:01 PM


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


From galaxiecustom500 at sbcglobal.net  Tue May 22 13:13:25 2007
From: galaxiecustom500 at sbcglobal.net (Jason M.)
Date: Tue, 22 May 2007 14:13:25 -0400
Subject: racing was: Re: [Diy_efi] is the list down or just quiet?
References: <464E3029.7040007@earthlink.net>
	<7.0.1.0.0.20070522222504.02769450@iinet.net.au>>
Message-ID: <000401c79c9c$ee8a22d0$6a01a8c0@BILLYBOB>

Mike,

If you ever get the chance to see the 2007 FSAE car from UWA, it is amazing. 
I got to see it while they were at goodyear (Akron, Ohio, U.S.) 
http://www.motorsport.uwa.edu.au/Images/uscrate.jpg  One piece carbon fiber 
frame, and the torsion spring suspension is awesome on that car.  They 
finished second overall at the FSAE competition last week in Michigian.

I'm on the Ohio State team, we missed the deadline for last weeks 
competition but will be heading to Fontana, California for the west 
competition in 2 weeks, and we still haven't painted our car, haha.  Our car 
isn't anything ground breaking this year.  New differential design, lots of 
titanium, lots of refinement to previous designs.

Jason
www.formulabuckeyes.com
----- Original Message ----- 
From: "Mike" <niche at iinet.net.au>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, May 22, 2007 10:26 AM
Subject: Re: [Diy_efi] is the list down or just quiet?


> At 07:00 AM 5/19/07, you wrote:
>>Hi  all,
>>
>>Haven't seen any activity on the list for a while.  I hope that means 
>>everybody is out racing!
>
> people seem to want to race me on the streets, my funny twin tyres 
> sticking out the back
> attract attention ;)
>
>
>
>
>
> Regards from
>
>
> Mike Massen
> Network Power Systems
> Lab 08 9444 8961
> Mb 0438 048961
> Perth, Western Australia
> * VL/VK & VN/VP/VR GMH Commodore Fuse Rail that wont warp or melt !
> * RB30 Skyline/Nissan/VL Milspec ignition drivers with diagnostic features 
> now in economy trials
> * Twin tyres for most sedans, trikes and motorcycle sidecars
> * Industrial grade PolyVinyliDeneChloride (PVDC Copolymer) in bulk, the 
> best
>  oxygen and water protective barrier you can find for circuit boards.
> * Special equipment on offer, 60KVA UPS with large battery cabinet - 
> AUD$12K
> Web site under construction   http://niche.iinet.net.au
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> Main WWW page:  http://www.diy-efi.org/diy_efi
> 




From ebuckler at icehouse.net  Tue May 22 13:49:40 2007
From: ebuckler at icehouse.net (Ernest Buckler)
Date: Tue, 22 May 2007 11:49:40 -0700
Subject: [Diy_efi] Other tips for Bonneville
References: <F4F253665838734F841C5B2C63B72F94866034@CCCMSXCH01.energy.power.corp>
Message-ID: <00d401c79ca1$f4b0be80$0300a8c0@userc276844d8d>

Pick up a bike?  As in buy?  Or rent or borrow?

To tell you the truth, I think a modern scooter would be more useful, if 
only because they have quite a useful carrying capacity under the seat. 
That will be one of your main requirements, ability to carry camera, 
batteries, hat, water, lunch, sunscreen, notebook, jacket, shoes/sandals, 
phone, walkie-talkies, a shade device, etc.  Did I say water?  I'll mention 
it again, water.  Conditions can change from quite cool to broiling hot, 
windy to calm, very quickly.   Fold-up tri-leg stool, or equivalent is v. 
handy, as there's not always a spare fender or tire or chair to sit on, 
depending on where you are watching from. Maybe lash that on the back?  Of 
course I say this without knowing what other resources you'll have there or 
whether you'll be riding this same machine back and forth to Wendover. It's 
a fair distance, so fuel is something you need to consider.  The speed is 
all around you, no real need for a fast machine to be pit crew or spectator, 
utility is more important in those roles.  If you are crew, then a small 
scooter stuffed in the trailer will suffice, but if you need to get back & 
forth to town, you'll want something like a 150 minimum, 250 better, IMO. 
Just talking, tho, cuz I don't know your situation at all, just my 
observations.  If you do take a bike, saddlebags and tailtrunk WILL be your 
friends!  [:oj

I may go myself this year, never have been there for races either, but have 
been there just to see the place, and have been packed and ready to go 
several times and had my plans waylaid for various reasons. I live about 800 
miles north of the place.  Last year the car I was to help with blew up on 
the dyno - a fuel injection/ign. problem, matter of fact.  Anyway, my advice 
is somewhat second hand, based on research as I prepared for the trip 
myself.  I was stationed in the desert for 3 years, did attend a lot of 
desert racing events in one role or another, so know enough to listen v. 
carefully when the old Bonneville hands give out the specific advice, am 
just passing it on.

What car will you be with?

Ernie


----- Original Message ----- 
From: <don.broadus at exeloncorp.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, May 22, 2007 11:05 AM
Subject: RE: [Diy_efi] Sunscreen tips of Bonneville


Thanks  Ernie,  I welcome all advice for my first Trip to the Salt. Will be 
flying in to Salt Lake City and driving to the Flats. Gonna pick up a Bike 
to roam around the pits. Plan on looking up any list members that will be 
there. Thanks for the sunscreen info.    Don



-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Ernest Buckler
Sent: Tuesday, May 22, 2007 11:48 AM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] Sunscreen tips of Bonneville


Don,
You probably have had tons of advice re sunscreen at Bonneville, but just in
case: One point that gets overlooked is to also apply sunscreen to areas
subject to REFLECTED sunlight, places where we ordinarily never get burned -
guys get sunburned under their arms, under their nose & chin, bottom of
ears, etc.   And, um, baggy shorts with no underwear...? Can be V. V. bad.
You get the message.  [:oj
Ernie




----- Original Message ----- 
From: <don.broadus at exeloncorp.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, May 22, 2007 6:29 AM
Subject: RE: [Diy_efi] is the list down or just quiet?


I don't know if anyone will be covering The Bonneville salt Flats Speed Week
Aug 11-17 But I will be there. First time at the Flats, going to be great.










-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Jim Butterfield
Sent: Tuesday, May 22, 2007 12:02 AM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] is the list down or just quiet?


Never heard of this... will it be on TV or will ESPN2 pull it in the lasst
minute as they did last weekend with drag racing??? ARRRRRRR

jim

don.broadus at exeloncorp.com wrote: Bonneville Speed week is only 81 days
away. Everyone must be thrashing to get the car ready.








-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Curtis Richards
Sent: Friday, May 18, 2007 6:01 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] is the list down or just quiet?


Hi  all,

Haven't seen any activity on the list for a while.  I hope that means
everybody is out racing!

-- 

Curtis W Richards

--

"The propriety of a law, in a constitutional light, must always be
deteremined by the nature of the powers upon which it is founded."

-- Alexander Hamilton (Federalist No. 33, 3 January 1788)


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi

-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies.
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi



---------------------------------
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007
2:01 PM


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007 
2:01 PM




From don.broadus at exeloncorp.com  Tue May 22 16:32:58 2007
From: don.broadus at exeloncorp.com (don.broadus at exeloncorp.com)
Date: Tue, 22 May 2007 16:32:58 -0500
Subject: [Diy_efi] Other tips for Bonneville
In-Reply-To: <00d401c79ca1$f4b0be80$0300a8c0@userc276844d8d>
Message-ID: <F4F253665838734F841C5B2C63B72F94866035@CCCMSXCH01.energy.power.corp>

I will drive a car to the flats. Then buy a cheap bike to go from the car to the pits. I like the idea of lashing everything to the bike. I will get fold up chair like you mentioned. Will bring extra water like you suggested. I will be by myself, just spectating. The guy I work with is having his 429 Ford build by Bob Sweeney of FX Engines. Bob built the engine for the  F/BFCC
Blowfish Barracuda that went 225 MPH last year. My buddy told Bob I would be there this year and Bob said to come by the Pits. Phillip Landry from this list will try to get his E/BSTR 32 Ford Roadster ready for the salt. Will look him up also. Hope you can make it Ernie, sounds like it's
gonna be a great time.       






-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Ernest Buckler
Sent: Tuesday, May 22, 2007 1:50 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] Other tips for Bonneville


Pick up a bike?  As in buy?  Or rent or borrow?

To tell you the truth, I think a modern scooter would be more useful, if 
only because they have quite a useful carrying capacity under the seat. 
That will be one of your main requirements, ability to carry camera, 
batteries, hat, water, lunch, sunscreen, notebook, jacket, shoes/sandals, 
phone, walkie-talkies, a shade device, etc.  Did I say water?  I'll mention 
it again, water.  Conditions can change from quite cool to broiling hot, 
windy to calm, very quickly.   Fold-up tri-leg stool, or equivalent is v. 
handy, as there's not always a spare fender or tire or chair to sit on, 
depending on where you are watching from. Maybe lash that on the back?  Of 
course I say this without knowing what other resources you'll have there or 
whether you'll be riding this same machine back and forth to Wendover. It's 
a fair distance, so fuel is something you need to consider.  The speed is 
all around you, no real need for a fast machine to be pit crew or spectator, 
utility is more important in those roles.  If you are crew, then a small 
scooter stuffed in the trailer will suffice, but if you need to get back & 
forth to town, you'll want something like a 150 minimum, 250 better, IMO. 
Just talking, tho, cuz I don't know your situation at all, just my 
observations.  If you do take a bike, saddlebags and tailtrunk WILL be your 
friends!  [:oj

I may go myself this year, never have been there for races either, but have 
been there just to see the place, and have been packed and ready to go 
several times and had my plans waylaid for various reasons. I live about 800 
miles north of the place.  Last year the car I was to help with blew up on 
the dyno - a fuel injection/ign. problem, matter of fact.  Anyway, my advice 
is somewhat second hand, based on research as I prepared for the trip 
myself.  I was stationed in the desert for 3 years, did attend a lot of 
desert racing events in one role or another, so know enough to listen v. 
carefully when the old Bonneville hands give out the specific advice, am 
just passing it on.

What car will you be with?

Ernie


----- Original Message ----- 
From: <don.broadus at exeloncorp.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, May 22, 2007 11:05 AM
Subject: RE: [Diy_efi] Sunscreen tips of Bonneville


Thanks  Ernie,  I welcome all advice for my first Trip to the Salt. Will be 
flying in to Salt Lake City and driving to the Flats. Gonna pick up a Bike 
to roam around the pits. Plan on looking up any list members that will be 
there. Thanks for the sunscreen info.    Don



-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Ernest Buckler
Sent: Tuesday, May 22, 2007 11:48 AM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] Sunscreen tips of Bonneville


Don,
You probably have had tons of advice re sunscreen at Bonneville, but just in
case: One point that gets overlooked is to also apply sunscreen to areas
subject to REFLECTED sunlight, places where we ordinarily never get burned -
guys get sunburned under their arms, under their nose & chin, bottom of
ears, etc.   And, um, baggy shorts with no underwear...? Can be V. V. bad.
You get the message.  [:oj
Ernie




----- Original Message ----- 
From: <don.broadus at exeloncorp.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, May 22, 2007 6:29 AM
Subject: RE: [Diy_efi] is the list down or just quiet?


I don't know if anyone will be covering The Bonneville salt Flats Speed Week
Aug 11-17 But I will be there. First time at the Flats, going to be great.










-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Jim Butterfield
Sent: Tuesday, May 22, 2007 12:02 AM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] is the list down or just quiet?


Never heard of this... will it be on TV or will ESPN2 pull it in the lasst
minute as they did last weekend with drag racing??? ARRRRRRR

jim

don.broadus at exeloncorp.com wrote: Bonneville Speed week is only 81 days
away. Everyone must be thrashing to get the car ready.








-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Curtis Richards
Sent: Friday, May 18, 2007 6:01 PM
To: diy_efi at diy-efi.org
Subject: [Diy_efi] is the list down or just quiet?


Hi  all,

Haven't seen any activity on the list for a while.  I hope that means
everybody is out racing!

-- 

Curtis W Richards

--

"The propriety of a law, in a constitutional light, must always be
deteremined by the nature of the powers upon which it is founded."

-- Alexander Hamilton (Federalist No. 33, 3 January 1788)


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi

-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies.
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi



---------------------------------
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007
2:01 PM


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007 
2:01 PM


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


From saltracer at hotmail.com  Tue May 22 19:23:47 2007
From: saltracer at hotmail.com (Phillip Landry)
Date: Tue, 22 May 2007 19:23:47 -0500
Subject: [Diy_efi] Other tips for Bonneville
In-Reply-To: <F4F253665838734F841C5B2C63B72F94866035@CCCMSXCH01.energy.power.corp>
Message-ID: <BAY139-F391AA8192C709601A7F608A2350@phx.gbl>

Don, sorry to say we're not going this year. We put the 302 SBF back in the 
roadster and will shoot for next year with out blown Merc flathead powered 
Henry J. (But I have been checking airplane tickets lately.) Phil


>From: <don.broadus at exeloncorp.com>
>Reply-To: diy_efi at diy-efi.org
>To: <diy_efi at diy-efi.org>
>Subject: RE: [Diy_efi] Other tips for Bonneville
>Date: Tue, 22 May 2007 16:32:58 -0500
>
>I will drive a car to the flats. Then buy a cheap bike to go from the car 
>to the pits. I like the idea of lashing everything to the bike. I will get 
>fold up chair like you mentioned. Will bring extra water like you 
>suggested. I will be by myself, just spectating. The guy I work with is 
>having his 429 Ford build by Bob Sweeney of FX Engines. Bob built the 
>engine for the  F/BFCC
>Blowfish Barracuda that went 225 MPH last year. My buddy told Bob I would 
>be there this year and Bob said to come by the Pits. Phillip Landry from 
>this list will try to get his E/BSTR 32 Ford Roadster ready for the salt. 
>Will look him up also. Hope you can make it Ernie, sounds like it's
>gonna be a great time.
>
>
>
>
>
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Ernest Buckler
>Sent: Tuesday, May 22, 2007 1:50 PM
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] Other tips for Bonneville
>
>
>Pick up a bike?  As in buy?  Or rent or borrow?
>
>To tell you the truth, I think a modern scooter would be more useful, if
>only because they have quite a useful carrying capacity under the seat.
>That will be one of your main requirements, ability to carry camera,
>batteries, hat, water, lunch, sunscreen, notebook, jacket, shoes/sandals,
>phone, walkie-talkies, a shade device, etc.  Did I say water?  I'll mention
>it again, water.  Conditions can change from quite cool to broiling hot,
>windy to calm, very quickly.   Fold-up tri-leg stool, or equivalent is v.
>handy, as there's not always a spare fender or tire or chair to sit on,
>depending on where you are watching from. Maybe lash that on the back?  Of
>course I say this without knowing what other resources you'll have there or
>whether you'll be riding this same machine back and forth to Wendover. It's
>a fair distance, so fuel is something you need to consider.  The speed is
>all around you, no real need for a fast machine to be pit crew or 
>spectator,
>utility is more important in those roles.  If you are crew, then a small
>scooter stuffed in the trailer will suffice, but if you need to get back &
>forth to town, you'll want something like a 150 minimum, 250 better, IMO.
>Just talking, tho, cuz I don't know your situation at all, just my
>observations.  If you do take a bike, saddlebags and tailtrunk WILL be your
>friends!  [:oj
>
>I may go myself this year, never have been there for races either, but have
>been there just to see the place, and have been packed and ready to go
>several times and had my plans waylaid for various reasons. I live about 
>800
>miles north of the place.  Last year the car I was to help with blew up on
>the dyno - a fuel injection/ign. problem, matter of fact.  Anyway, my 
>advice
>is somewhat second hand, based on research as I prepared for the trip
>myself.  I was stationed in the desert for 3 years, did attend a lot of
>desert racing events in one role or another, so know enough to listen v.
>carefully when the old Bonneville hands give out the specific advice, am
>just passing it on.
>
>What car will you be with?
>
>Ernie
>
>
>----- Original Message -----
>From: <don.broadus at exeloncorp.com>
>To: <diy_efi at diy-efi.org>
>Sent: Tuesday, May 22, 2007 11:05 AM
>Subject: RE: [Diy_efi] Sunscreen tips of Bonneville
>
>
>Thanks  Ernie,  I welcome all advice for my first Trip to the Salt. Will be
>flying in to Salt Lake City and driving to the Flats. Gonna pick up a Bike
>to roam around the pits. Plan on looking up any list members that will be
>there. Thanks for the sunscreen info.    Don
>
>
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Ernest Buckler
>Sent: Tuesday, May 22, 2007 11:48 AM
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] Sunscreen tips of Bonneville
>
>
>Don,
>You probably have had tons of advice re sunscreen at Bonneville, but just 
>in
>case: One point that gets overlooked is to also apply sunscreen to areas
>subject to REFLECTED sunlight, places where we ordinarily never get burned 
>-
>guys get sunburned under their arms, under their nose & chin, bottom of
>ears, etc.   And, um, baggy shorts with no underwear...? Can be V. V. bad.
>You get the message.  [:oj
>Ernie
>
>
>
>
>----- Original Message -----
>From: <don.broadus at exeloncorp.com>
>To: <diy_efi at diy-efi.org>
>Sent: Tuesday, May 22, 2007 6:29 AM
>Subject: RE: [Diy_efi] is the list down or just quiet?
>
>
>I don't know if anyone will be covering The Bonneville salt Flats Speed 
>Week
>Aug 11-17 But I will be there. First time at the Flats, going to be great.
>
>
>
>
>
>
>
>
>
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Jim Butterfield
>Sent: Tuesday, May 22, 2007 12:02 AM
>To: diy_efi at diy-efi.org
>Subject: RE: [Diy_efi] is the list down or just quiet?
>
>
>Never heard of this... will it be on TV or will ESPN2 pull it in the lasst
>minute as they did last weekend with drag racing??? ARRRRRRR
>
>jim
>
>don.broadus at exeloncorp.com wrote: Bonneville Speed week is only 81 days
>away. Everyone must be thrashing to get the car ready.
>
>
>
>
>
>
>
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Curtis Richards
>Sent: Friday, May 18, 2007 6:01 PM
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] is the list down or just quiet?
>
>
>Hi  all,
>
>Haven't seen any activity on the list for a while.  I hope that means
>everybody is out racing!
>
>--
>
>Curtis W Richards
>
>--
>
>"The propriety of a law, in a constitutional light, must always be
>deteremined by the nature of the powers upon which it is founded."
>
>-- Alexander Hamilton (Federalist No. 33, 3 January 1788)
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>
>-----------------------------------------
>**************************************************
>This e-mail and any of its attachments may contain Exelon
>Corporation proprietary information, which is privileged,
>confidential, or subject to copyright belonging to the Exelon
>Corporation family of Companies.
>This e-mail is intended solely for the use of the individual or
>entity to which it is addressed.  If you are not the intended
>recipient of this e-mail, you are hereby notified that any
>dissemination, distribution, copying, or action taken in relation
>to the contents of and attachments to this e-mail is strictly
>prohibited and may be unlawful.  If you have received this e-mail
>in error, please notify the sender immediately and permanently
>delete the original and any copy of this e-mail and any printout.
>Thank You.
>**************************************************
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>
>
>
>---------------------------------
>Be a better Globetrotter. Get better travel answers from someone who knows.
>Yahoo! Answers - Check it out.
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007
>2:01 PM
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007
>2:01 PM
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi




From don.broadus at exeloncorp.com  Wed May 23 08:15:59 2007
From: don.broadus at exeloncorp.com (don.broadus at exeloncorp.com)
Date: Wed, 23 May 2007 08:15:59 -0500
Subject: [Diy_efi] Other tips for Bonneville
In-Reply-To: <BAY139-F391AA8192C709601A7F608A2350@phx.gbl>
Message-ID: <F4F253665838734F841C5B2C63B72F94866037@CCCMSXCH01.energy.power.corp>

Hi Phil: The Henry J is a cool car, blown flatty powered it will be great ! Please keep us posted on your progress.



  

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Phillip Landry
Sent: Tuesday, May 22, 2007 7:24 PM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] Other tips for Bonneville


Don, sorry to say we're not going this year. We put the 302 SBF back in the 
roadster and will shoot for next year with out blown Merc flathead powered 
Henry J. (But I have been checking airplane tickets lately.) Phil


>From: <don.broadus at exeloncorp.com>
>Reply-To: diy_efi at diy-efi.org
>To: <diy_efi at diy-efi.org>
>Subject: RE: [Diy_efi] Other tips for Bonneville
>Date: Tue, 22 May 2007 16:32:58 -0500
>
>I will drive a car to the flats. Then buy a cheap bike to go from the car 
>to the pits. I like the idea of lashing everything to the bike. I will get 
>fold up chair like you mentioned. Will bring extra water like you 
>suggested. I will be by myself, just spectating. The guy I work with is 
>having his 429 Ford build by Bob Sweeney of FX Engines. Bob built the 
>engine for the  F/BFCC
>Blowfish Barracuda that went 225 MPH last year. My buddy told Bob I would 
>be there this year and Bob said to come by the Pits. Phillip Landry from 
>this list will try to get his E/BSTR 32 Ford Roadster ready for the salt. 
>Will look him up also. Hope you can make it Ernie, sounds like it's
>gonna be a great time.
>
>
>
>
>
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Ernest Buckler
>Sent: Tuesday, May 22, 2007 1:50 PM
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] Other tips for Bonneville
>
>
>Pick up a bike?  As in buy?  Or rent or borrow?
>
>To tell you the truth, I think a modern scooter would be more useful, if
>only because they have quite a useful carrying capacity under the seat.
>That will be one of your main requirements, ability to carry camera,
>batteries, hat, water, lunch, sunscreen, notebook, jacket, shoes/sandals,
>phone, walkie-talkies, a shade device, etc.  Did I say water?  I'll mention
>it again, water.  Conditions can change from quite cool to broiling hot,
>windy to calm, very quickly.   Fold-up tri-leg stool, or equivalent is v.
>handy, as there's not always a spare fender or tire or chair to sit on,
>depending on where you are watching from. Maybe lash that on the back?  Of
>course I say this without knowing what other resources you'll have there or
>whether you'll be riding this same machine back and forth to Wendover. It's
>a fair distance, so fuel is something you need to consider.  The speed is
>all around you, no real need for a fast machine to be pit crew or 
>spectator,
>utility is more important in those roles.  If you are crew, then a small
>scooter stuffed in the trailer will suffice, but if you need to get back &
>forth to town, you'll want something like a 150 minimum, 250 better, IMO.
>Just talking, tho, cuz I don't know your situation at all, just my
>observations.  If you do take a bike, saddlebags and tailtrunk WILL be your
>friends!  [:oj
>
>I may go myself this year, never have been there for races either, but have
>been there just to see the place, and have been packed and ready to go
>several times and had my plans waylaid for various reasons. I live about 
>800
>miles north of the place.  Last year the car I was to help with blew up on
>the dyno - a fuel injection/ign. problem, matter of fact.  Anyway, my 
>advice
>is somewhat second hand, based on research as I prepared for the trip
>myself.  I was stationed in the desert for 3 years, did attend a lot of
>desert racing events in one role or another, so know enough to listen v.
>carefully when the old Bonneville hands give out the specific advice, am
>just passing it on.
>
>What car will you be with?
>
>Ernie
>
>
>----- Original Message -----
>From: <don.broadus at exeloncorp.com>
>To: <diy_efi at diy-efi.org>
>Sent: Tuesday, May 22, 2007 11:05 AM
>Subject: RE: [Diy_efi] Sunscreen tips of Bonneville
>
>
>Thanks  Ernie,  I welcome all advice for my first Trip to the Salt. Will be
>flying in to Salt Lake City and driving to the Flats. Gonna pick up a Bike
>to roam around the pits. Plan on looking up any list members that will be
>there. Thanks for the sunscreen info.    Don
>
>
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Ernest Buckler
>Sent: Tuesday, May 22, 2007 11:48 AM
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] Sunscreen tips of Bonneville
>
>
>Don,
>You probably have had tons of advice re sunscreen at Bonneville, but just 
>in
>case: One point that gets overlooked is to also apply sunscreen to areas
>subject to REFLECTED sunlight, places where we ordinarily never get burned 
>-
>guys get sunburned under their arms, under their nose & chin, bottom of
>ears, etc.   And, um, baggy shorts with no underwear...? Can be V. V. bad.
>You get the message.  [:oj
>Ernie
>
>
>
>
>----- Original Message -----
>From: <don.broadus at exeloncorp.com>
>To: <diy_efi at diy-efi.org>
>Sent: Tuesday, May 22, 2007 6:29 AM
>Subject: RE: [Diy_efi] is the list down or just quiet?
>
>
>I don't know if anyone will be covering The Bonneville salt Flats Speed 
>Week
>Aug 11-17 But I will be there. First time at the Flats, going to be great.
>
>
>
>
>
>
>
>
>
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Jim Butterfield
>Sent: Tuesday, May 22, 2007 12:02 AM
>To: diy_efi at diy-efi.org
>Subject: RE: [Diy_efi] is the list down or just quiet?
>
>
>Never heard of this... will it be on TV or will ESPN2 pull it in the lasst
>minute as they did last weekend with drag racing??? ARRRRRRR
>
>jim
>
>don.broadus at exeloncorp.com wrote: Bonneville Speed week is only 81 days
>away. Everyone must be thrashing to get the car ready.
>
>
>
>
>
>
>
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Curtis Richards
>Sent: Friday, May 18, 2007 6:01 PM
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] is the list down or just quiet?
>
>
>Hi  all,
>
>Haven't seen any activity on the list for a while.  I hope that means
>everybody is out racing!
>
>--
>
>Curtis W Richards
>
>--
>
>"The propriety of a law, in a constitutional light, must always be
>deteremined by the nature of the powers upon which it is founded."
>
>-- Alexander Hamilton (Federalist No. 33, 3 January 1788)
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>
>-----------------------------------------
>**************************************************
>This e-mail and any of its attachments may contain Exelon
>Corporation proprietary information, which is privileged,
>confidential, or subject to copyright belonging to the Exelon
>Corporation family of Companies.
>This e-mail is intended solely for the use of the individual or
>entity to which it is addressed.  If you are not the intended
>recipient of this e-mail, you are hereby notified that any
>dissemination, distribution, copying, or action taken in relation
>to the contents of and attachments to this e-mail is strictly
>prohibited and may be unlawful.  If you have received this e-mail
>in error, please notify the sender immediately and permanently
>delete the original and any copy of this e-mail and any printout.
>Thank You.
>**************************************************
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>
>
>
>---------------------------------
>Be a better Globetrotter. Get better travel answers from someone who knows.
>Yahoo! Answers - Check it out.
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007
>2:01 PM
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007
>2:01 PM
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page:  http://www.diy-efi.org/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


From llingle at seidata.com  Mon May 28 21:21:32 2007
From: llingle at seidata.com (Logan Lingle)
Date: Mon, 28 May 2007 22:21:32 -0400
Subject: [Diy_efi] Scan Tools
Message-ID: <465B8E2C.80604@seidata.com>

Hi.

I've been using a Mac Mentor (Actually a re-branded OTC Genisys, sold 
under the Mac Tools Name) for some time and recently went to install my 
"Free" upgrade only to find out that it's not "Free" They are trying to 
hold me up for more money in the form of a "Smart Insert" they never 
told me I needed when I bought it.

(Much like they never informed me that the "Free" "Imports" upgrade 
doesn't cover "Asian Imports" It's only good for imports from Finland or 
New Guinea or something, I suppose. But, I digress.)

THEN they tell me the tool is just soooo damned old and for the low, low 
price of only $2100.00 and my current scanner,  they'll make me a deal 
and replace my archaic, 3  year old,  piece of Aztec, sun dial crap with 
their brand new version! Oh boy! OH BOY!

I was about to write out the check when a friend of mine told me to look 
into a PC or palm based solution. He suggested the following products 
and said he had heard good things about them. He's a Service manager for 
Ford, and he uses PC based software there. He showed it to me and it's 
way cool,  but it's a proprietary Ford product and I need something 
universal for both work and experimentation.

The products he recommended:

http://autoenginuity.com/

http://autotap.com/

(The autoenginuity product looks particularly appealing.. and it's 
priced right.)

I added it up and, do you know I could have an Alienware laptop and 
either software package for the price of a Mentor new?  So naturally, 
I'm interested..  But I was hoping someone here was familiar with these 
products and could either offer their opinion on them or recommend a 
viable competitor.

Besides, I'm sick to death of tossing hardware based scan tools. It just 
seems so senseless. I'm not unhappy with the Mentor, it's a good tool. I 
just need an upgrade for newer vehicles. Ya know, it seems silly to keep 
trashing these things at a thousand or two grand a pop when I can just 
download an update and/or buy a new cable and be ready to go.

Your thoughts are appreciated.

Thanks and regards.

Logan






From 121479 at bellsouth.net  Tue May 29 00:25:16 2007
From: 121479 at bellsouth.net (Matt Peacock)
Date: Mon, 28 May 2007 22:25:16 -0700
Subject: [Diy_efi] Scan Tools
References: <465B8E2C.80604@seidata.com>
Message-ID: <007501c7a1b1$bdb1d4e0$6001a8c0@registerfc78b7>

Jay's stuff at autoenginuity is awesome. It does some stuff (oem level) they 
don't list on their site. It just went up 25% in the last few months (it was 
about time thought).  He's really offering alot for imports too! Autotap is 
also a good product. Ease is very competitive too.

For a cost stand point. Alex Peppers obd-2.com software is really cost 
effective against alot of programs.

Matt 




From kml_daniel at yahoo.com  Tue May 29 05:12:37 2007
From: kml_daniel at yahoo.com (K DANIEL)
Date: Tue, 29 May 2007 03:12:37 -0700 (PDT)
Subject: [Diy_efi] Scan Tools
Message-ID: <343661.51146.qm@web51712.mail.re2.yahoo.com>

Hi 
I have used similar scan tool from www.scantool.net it is very good and it cost less than $150 

K Daniel


----- Original Message ----
From: Logan Lingle <llingle at seidata.com>
To: diy_efi at diy-efi.org
Sent: Tuesday, May 29, 2007 6:21:32 AM
Subject: [Diy_efi] Scan Tools


Hi.

I've been using a Mac Mentor (Actually a re-branded OTC Genisys, sold 
under the Mac Tools Name) for some time and recently went to install my 
"Free" upgrade only to find out that it's not "Free" They are trying to 
hold me up for more money in the form of a "Smart Insert" they never 
told me I needed when I bought it.

(Much like they never informed me that the "Free" "Imports" upgrade 
doesn't cover "Asian Imports" It's only good for imports from Finland or 
New Guinea or something, I suppose. But, I digress.)

THEN they tell me the tool is just soooo damned old and for the low, low 
price of only $2100.00 and my current scanner,  they'll make me a deal 
and replace my archaic, 3  year old,  piece of Aztec, sun dial crap with 
their brand new version! Oh boy! OH BOY!

I was about to write out the check when a friend of mine told me to look 
into a PC or palm based solution. He suggested the following products 
and said he had heard good things about them. He's a Service manager for 
Ford, and he uses PC based software there. He showed it to me and it's 
way cool,  but it's a proprietary Ford product and I need something 
universal for both work and experimentation.

The products he recommended:

http://autoenginuity.com/

http://autotap.com/

(The autoenginuity product looks particularly appealing.. and it's 
priced right.)

I added it up and, do you know I could have an Alienware laptop and 
either software package for the price of a Mentor new?  So naturally, 
I'm interested..  But I was hoping someone here was familiar with these 
products and could either offer their opinion on them or recommend a 
viable competitor.

Besides, I'm sick to death of tossing hardware based scan tools. It just 
seems so senseless. I'm not unhappy with the Mentor, it's a good tool. I 
just need an upgrade for newer vehicles. Ya know, it seems silly to keep 
trashing these things at a thousand or two grand a pop when I can just 
download an update and/or buy a new cable and be ready to go.

Your thoughts are appreciated.

Thanks and regards.

Logan




_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi


 
____________________________________________________________________________________
Looking for earth-friendly autos? 
Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center.
http://autos.yahoo.com/green_center/

From carl-otto at usa.net  Tue May 29 05:50:28 2007
From: carl-otto at usa.net (CARL-OTTO RUSTAD)
Date: Tue, 29 May 2007 12:50:28 +0200
Subject: [Diy_efi] Scan Tools
Message-ID: <607LeCkxC3750S07.1180435828@cmsweb07.cms.usa.net>

Logan!

I bought the Harrison R&D last year, 28 Sept.
This is a copy of my question "E-mail",
and the answer i received almost instantly.
> Can the following equipment: USB OBDScan+CANtm
> do some datalogging, reset fault codes, and
> troubleshoot: Dodge 2005-model (gas-fuelinjected)
> Ram 1500 4x4 with 5.7cid magnum engine?

>Yes, and this Unit will work for all Vehicles from 96 to 2007 and beyond.

The Dodge Ram was a project car, wreck from an accident,
body off the frame, broken axle, and wiring partially
disconnected etc.
The tool was needed to get it all back together,
with no trouble codes.
Easy to use and cheap.
It was even hooked up to a Jeep Wrangler 1996 a while
back and works great.
Test driving with a cheap laptop connected with USB
interface, excellent to use.

Take a look at:
http://www.obdscan.net/
I quess mine is similar to this
upgraded version that sells for $139.99
http://www.obdscan.net/scantools.htm

This is a link to a cheap ALDL interface cable
for older vehicles.
http://www.enghmotors.com/cable/default.aspx
Said to work with many free programs or
at least very cheap.
I have not tried the cable myself.

I'm a newbie on this things, I thought I
should give you my experience anyway because
I have the same opinion when it comes to people
selling stuff, just to tell you later on that you
have to pay another bill, and upgrade it to make it work.

Regards Carl.

------ Original Message ------
Received: Tue, 29 May 2007 04:15:01 AM CEST
From: Logan Lingle <llingle at seidata.com>
To: diy_efi at diy-efi.org
Subject: [Diy_efi] Scan Tools

Hi.

I've been using a Mac Mentor (Actually a re-branded OTC Genisys, sold 
under the Mac Tools Name) for some time and recently went to install my 
"Free" upgrade only to find out that it's not "Free" They are trying to 
hold me up for more money in the form of a "Smart Insert" they never 
told me I needed when I bought it.

(Much like they never informed me that the "Free" "Imports" upgrade 
doesn't cover "Asian Imports" It's only good for imports from Finland or 
New Guinea or something, I suppose. But, I digress.)

THEN they tell me the tool is just soooo damned old and for the low, low 
price of only $2100.00 and my current scanner,  they'll make me a deal 
and replace my archaic, 3  year old,  piece of Aztec, sun dial crap with 
their brand new version! Oh boy! OH BOY!

I was about to write out the check when a friend of mine told me to look 
into a PC or palm based solution. He suggested the following products 
and said he had heard good things about them. He's a Service manager for 
Ford, and he uses PC based software there. He showed it to me and it's 
way cool,  but it's a proprietary Ford product and I need something 
universal for both work and experimentation.

The products he recommended:

http://autoenginuity.com/

http://autotap.com/

(The autoenginuity product looks particularly appealing.. and it's 
priced right.)

I added it up and, do you know I could have an Alienware laptop and 
either software package for the price of a Mentor new?  So naturally, 
I'm interested..  But I was hoping someone here was familiar with these 
products and could either offer their opinion on them or recommend a 
viable competitor.

Besides, I'm sick to death of tossing hardware based scan tools. It just 
seems so senseless. I'm not unhappy with the Mentor, it's a good tool. I 
just need an upgrade for newer vehicles. Ya know, it seems silly to keep 
trashing these things at a thousand or two grand a pop when I can just 
download an update and/or buy a new cable and be ready to go.

Your thoughts are appreciated.

Thanks and regards.

Logan




_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi






From b.shaw at comcast.net  Tue May 29 06:49:13 2007
From: b.shaw at comcast.net (Bill Shaw)
Date: Tue, 29 May 2007 07:49:13 -0400
Subject: [Diy_efi] Scan Tools
In-Reply-To: <607LeCkxC3750S07.1180435828@cmsweb07.cms.usa.net>
References: <607LeCkxC3750S07.1180435828@cmsweb07.cms.usa.net>
Message-ID: <465C1339.5060204@comcast.net>

Speaking of scan tools,  anyone know of one that will hook up to a '99  
Audi A6QA (besides VAG-COM)? The normal tools don't seem to work.

Bill

CARL-OTTO RUSTAD wrote:
> Logan!
>
> I bought the Harrison R&D last year, 28 Sept.
> This is a copy of my question "E-mail",
> and the answer i received almost instantly.
>   
>> Can the following equipment: USB OBDScan+CANtm
>> do some datalogging, reset fault codes, and
>> troubleshoot: Dodge 2005-model (gas-fuelinjected)
>> Ram 1500 4x4 with 5.7cid magnum engine?
>>     
>
>   
>> Yes, and this Unit will work for all Vehicles from 96 to 2007 and beyond.
>>     
>
> The Dodge Ram was a project car, wreck from an accident,
> body off the frame, broken axle, and wiring partially
> disconnected etc.
> The tool was needed to get it all back together,
> with no trouble codes.
> Easy to use and cheap.
> It was even hooked up to a Jeep Wrangler 1996 a while
> back and works great.
> Test driving with a cheap laptop connected with USB
> interface, excellent to use.
>
> Take a look at:
> http://www.obdscan.net/
> I quess mine is similar to this
> upgraded version that sells for $139.99
> http://www.obdscan.net/scantools.htm
>
> This is a link to a cheap ALDL interface cable
> for older vehicles.
> http://www.enghmotors.com/cable/default.aspx
> Said to work with many free programs or
> at least very cheap.
> I have not tried the cable myself.
>
> I'm a newbie on this things, I thought I
> should give you my experience anyway because
> I have the same opinion when it comes to people
> selling stuff, just to tell you later on that you
> have to pay another bill, and upgrade it to make it work.
>
> Regards Carl.
>
> ------ Original Message ------
> Received: Tue, 29 May 2007 04:15:01 AM CEST
> From: Logan Lingle <llingle at seidata.com>
> To: diy_efi at diy-efi.org
> Subject: [Diy_efi] Scan Tools
>
> Hi.
>
> I've been using a Mac Mentor (Actually a re-branded OTC Genisys, sold 
> under the Mac Tools Name) for some time and recently went to install my 
> "Free" upgrade only to find out that it's not "Free" They are trying to 
> hold me up for more money in the form of a "Smart Insert" they never 
> told me I needed when I bought it.
>
> (Much like they never informed me that the "Free" "Imports" upgrade 
> doesn't cover "Asian Imports" It's only good for imports from Finland or 
> New Guinea or something, I suppose. But, I digress.)
>
> THEN they tell me the tool is just soooo damned old and for the low, low 
> price of only $2100.00 and my current scanner,  they'll make me a deal 
> and replace my archaic, 3  year old,  piece of Aztec, sun dial crap with 
> their brand new version! Oh boy! OH BOY!
>
> I was about to write out the check when a friend of mine told me to look 
> into a PC or palm based solution. He suggested the following products 
> and said he had heard good things about them. He's a Service manager for 
> Ford, and he uses PC based software there. He showed it to me and it's 
> way cool,  but it's a proprietary Ford product and I need something 
> universal for both work and experimentation.
>
> The products he recommended:
>
> http://autoenginuity.com/
>
> http://autotap.com/
>
> (The autoenginuity product looks particularly appealing.. and it's 
> priced right.)
>
> I added it up and, do you know I could have an Alienware laptop and 
> either software package for the price of a Mentor new?  So naturally, 
> I'm interested..  But I was hoping someone here was familiar with these 
> products and could either offer their opinion on them or recommend a 
> viable competitor.
>
> Besides, I'm sick to death of tossing hardware based scan tools. It just 
> seems so senseless. I'm not unhappy with the Mentor, it's a good tool. I 
> just need an upgrade for newer vehicles. Ya know, it seems silly to keep 
> trashing these things at a thousand or two grand a pop when I can just 
> download an update and/or buy a new cable and be ready to go.
>
> Your thoughts are appreciated.
>
> Thanks and regards.
>
> Logan
>
>   


From A6intruder at myo-p.com  Tue May 29 07:35:21 2007
From: A6intruder at myo-p.com (Daniel Nicoson)
Date: Tue, 29 May 2007 08:35:21 -0400
Subject: [Diy_efi] Scan Tools
In-Reply-To: <007501c7a1b1$bdb1d4e0$6001a8c0@registerfc78b7>
Message-ID: <KMEGIPPMDGHIFFAKGOLECEIHJIAA.A6intruder@myo-p.com>

I bought the Autoenginuity system for work on my two 5 series BMW's.  I paid
for the BWM specific stuff and it works fine.  I haven't tried the generic
Ford version yet on my 1994 Mustang.  The Mustang never seems to have too
many "code problems".

Jay from Autoenginuity is VERY good to work with.  I badgered him over
Thanksgiving weekend last fall and he helped me get straightened out via
cell phone and email.  I was pulling logs in my driveway, emailing them to
him on the spot and he would send an updated program to me within a half
hour.  I wouldn't expect that response all the time but helped me out in a
pinch.  It turned out the module on my BMW was newer than the car and I
simply had to select the newer year for the module to be properly
recognized.  He was hoping to incorporate an automatic module-age lookup
routine...

Anyway, a positive experience for me.

Dan Nicoson

-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Matt Peacock
Sent: Tuesday, May 29, 2007 1:25 AM
To: diy_efi at diy-efi.org
Subject: Re: [Diy_efi] Scan Tools

Jay's stuff at autoenginuity is awesome. It does some stuff (oem level) they
don't list on their site. It just went up 25% in the last few months (it was
about time thought).  He's really offering alot for imports too! Autotap is
also a good product. Ease is very competitive too.

For a cost stand point. Alex Peppers obd-2.com software is really cost
effective against alot of programs.

Matt


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
Main WWW page:  http://www.diy-efi.org/diy_efi