Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue)

[Roger Heflin <rah@horizon.hit.net>]

I am running diacom with no problems on a 755 (I believe) it is a
486dx2-50 .   I don't thknk I had to do any special things to get it
to work.   I has also not had any obvious single frame oddiities.


			Roger

On Sat, 12 Feb 2000, Squash wrote:

> I would blame it on those DSP drivers that thinkpads use.  They sure are a pain.  I have never
> seen a fix for them as they screw up many other things, too.
> 
> Squash
> 
> --- "K. Wong" <brougham1@home.com> wrote:
> > > I have the Diacom, but am not all that happy with it, it seems really
> > > tempermental with my laptop, IBM 755. Plus I'm really not thrilled with DOS
> > > apps that cost $300... When it works it works OK, but I cannot count on it
> > > at all anymore- and it has lost the ability to link to any 8192 baud apps.
> > 
> > Tom, Diacom works fine on my Toshiba T1000XE.  Recently, I have been using
> > a Thinkpad 760C and also noticed the inability to link with a 8192 baud
> > source (1990 3800).  When connected to a 160 baud ECM (1228330),
> > I have observed intermittent errors: out of range data or trouble codes
> > specific to one frame.  There's about 4 or 5 obvious errors in a 200 frame
> > capture.  Does anyone have a possible explanation or workaround?  Thanks.
> > 
> > Kevin Wong         mailto:brougham1@home.com         Toronto, Ontario, Canada
> > 
> > ----------------------------------------------------------------------------
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> > 
> > 
> 
> =====
> Trains, Trucks, and EFI at http://www.elknet.net/squash
> __________________________________________________
> Do You Yahoo!?
> Talk to your friends online with Yahoo! Messenger.
> http://im.yahoo.com
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> 
> 

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org