Re: lb/hr calculation

[rr <RRauscher@nni.com>]

Wow, I'm having trouble following you guys. However, I think I see the
discrepancy. Tim, your equation below is a correct conversion from
gms/sec to lbs/hr.

Looking at the anht hac, location 41c is in sec/gms, not gms/sec. This
appears to be the sticking point. That hac has 460 in that location
for 22# injectors.     ARG = ((SEC/GRAM * 256) * 5). The bigger
the injector, the smaller the number.

BobR.


trax wrote:

> Could someone here please post why my calculation is wrong (or if it is
> correct).  I just want to make sure that my new .bin will have the
> appropriate setting:
>
> 2.56g/s * 1lb/454g * 3600sec/Hr = 20.299559lb/hr
>
> Tim
>
> >The calc I posted matches the aujp bin, so I accept it to work.
> >It also matches the 38# setting
> >in the new "custom" chip I just wasted money on.
> >
> >I'm not a math wiz, so I can't twist it around like yours, but i'm
> >pretty sure yours is incorrect.
> >
> >Squash
> >p.s. I seem to recall that this calc is the same for the 7747, and
> >that is where I got it.  It
> >seems to jive in my head?
> >
> >--- trax <trax@frederickmd.com> wrote:
> >> Calculations:
> >>
> >> 2.56g/s * 1lb/454g * 3600sec/Hr = 20.299559
> >>
> >> Am I missing something?
> >>
> >> >1/(#hr/3600*453.59237)*1280  --  use this to get your value.  261
> >> >(dec) = 38 #/hr according to
> >> >this, and 462 = 22#, 423 = 24#
> >>
> >> Tim
> >>
> >-------------------------------------------------------------------
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org