Oh by the way...all 4 interchange... the 930 and 199 with the 4l80e came from the ¾ and 1 tons... They don't have much for emmissions ie AIR or diver valves..and stuff.. Putting a stock bin from a 95 350 3/4ton 4x4 into a ½ ton 2wd gives you roughly 35hp......enough you can feelit..... Makes me think losa room for tuning :-)....been working on the old mans truck... Mike Rolica Plant A, Magnesium Products Division Strathroy (519)-245-4040 Ext. 265 -----Original Message----- From: Bruce Plecan [SMTP:nacelp@bright.net] Sent: Thursday, June 15, 2000 3:20 PM To: gmecm@diy-efi.org Subject: Re: ECM part numbers? > I'll have these posted as soon as I can get numbers... > > 95 ECM, 4.3L, 7.4L (C/K) Manual Transmission 16156930 > 95 PCM, 4.3L, 5.0L, 5.7L (C/K) 4l60E 16156930 16197427 > 95 PCM, 4.3L, 5.7L, 7.4L (C/K) 4L80E 16156930 16171199 16196396 16197427 I've *heard* that the bins from any of these interchange and work just fine in any of the ecms mentioned. Why all the different numbers I haven't a clue. Grumpy ---------------------------------------------------------------------------- To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes) in the body of a message (not the subject) to majordomo@lists.diy-efi.org
<<application/ms-tnef>>