Re: Beretta PROM use...

[romans@starstream.net (Romans, Mark)]

You need to buy a V8 memcal. You listed the reasons below.
Mark
----- Original Message -----
From: "Mike Frels" <frels@rosharon.camco.slb.com>
To: <gmecm@diy-efi.org>
Sent: Wednesday, September 06, 2000 6:22 AM
Subject: Beretta PROM use...


> This weekend I picked up a '7730 out of a Beretta. I am in the process of
> collecting all the bits and pieces to convert my '86 MAF TPI Camaro to
MAP.
> The ECM still contains the MEMCAL. It is an ATTA6656.
>
> Is this MEMCAL usable in a V8 application? I can erase the PROM and put a
> V8 image on it but are the knock sensor, limp home, and etc compatible
with
> Camaro V8 hardware. I know nothing about non-Camaro applications for this
ECM.
>
> Mike
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org