Re: 747 spark over run

["Bruce Plecan" <nacelp@bright.net>]

You can do about anything you want on the lowest KPa vs rpm column,  the
only way I've gotten there is in overrun.
   On your tale values things sound a tad off, course working *blind* here
at the moment
Bruce


> On my xfire 747 combo my idle vac is 20" and at 2600rpm cruise it's around
> 23-24.
> Since the spark table only goes to 21" and fuel 24" can I use the coolant
> compensation spark as an overrun to pull a little advance from the higher
> areas or is not a good idea? Really hate to taper tables too close to my
> cruise range.
> Other ideas alway welcome.
>
> Kevin R
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org