I went and got all 12's and also the fan/fans would also turn on just like
the old days. So I guess it is all good :-) Thanks.
Dan
----- Original Message -----
From: "Len Sabatine" <sabatine@epix.net>
To: <gmecm@diy-efi.org>
Sent: Saturday, November 04, 2000 11:10 AM
Subject: Re: New Prom
> For sure "12" is indicating " [Dist ] Ign Reference" at the beginning of
> the sequence. Fp relay will toggle at this point as well , telltale
> signs that instructions are executing. Sometimes , no Fp relay toggle and
> fans run [ if equipped] @ key on is a sign of a
> programming or Eprom error gotchas.
> Len
>
> >Seems like applying the 'ol ALDL jumper, moving the key to "RUN", and
> >observing the check eng light flashing "12" repeatedly indicates the ECM
> >is executing the .bin.
> >
> >Anyone disagree?
> >
> >-Kevin
> >
> >At 01:20 AM 11/4/00 -0600, you wrote:
> > >>>>
> >
> >>What is the easiest way to tell if the new prom is being used? I have
> >>successfully created my first chip (I think) and I just want to double
> >>check before I head out with Diacom for tuning.
> >>
> >>Dan - Newbie
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org