Re: Pocket Programmer & Emulator

[DC Smith <morepoweral@tetranet.net>]

I'm probably going to make a 9 volt regulator to run it. Diodes in
series will drop ~.7 volts each, depending on how far it needs to come
down.
 I havn't really gotten too far into things yet. The text files take
time to go through. I havn't even tried it yet. I've been reading
through the info to get somewhat acclimated.
 I use a lighter plug to power my laptop and will probably need to add
another power outlet under the passenger seat in my sled to power the
programmer/emulator.

Jeff M wrote:
> 
> Their 120 volt wall outlet power supply (no load) provides 13.5 volts even,
> though this is the limit as past much that, the 2N4401s will give out.  So
> hopefully your cars DC is kept close to 13.5 and smooth (I have seen enough
> alternators not do smooth well ;-).
> 
> Jeff M
> 
> > I think it will run on 12V.
> > From: "Michael Davis" <davis@mail.eecis.udel.edu>
> >
> > >
> > > So you need to have a UPS or an Inverter in your car to power
> > > the programmer?  Seems like a hassle IMHO...
> > >
> > > mike
> > >
> > > In message <8a.23a6104.261cca74@aol.com>,JTesta1966@aol.com writes:
> > > >In a message dated 4/5/00 12:19:21 PM Eastern Daylight Time,
> > > >morepoweral@tetranet.net writes:
> > > >
> > > ><< I sure hope so, Jim! That's what I want it for. I'll let ya know how
> > > > well it works.
> > > >  BTW, you need the pocket programmer to use the emulator from my
> > > > understanding. >>
> > > >
> > > >Yah..what I read was you burn to the emulator (it plugs into the
> > programmer)
> > > >and the file stays in ram/rom whatever. Sounds trick. Definatly let me
> > know,
> > > >I might get one for myself too :-)
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org

-- 
***********************************************************************
Dan Smith      84 Regal   11.841@115.09     GSCA# 1459
St.Charles, Missouri 
mailto:morepoweral@tetranet.net               
http://www.tetranet.net/users/morepoweral
***********************************************************************
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org