[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: TBI SPACER ?



Just a tidbit - noticed that TPI Specialities is selling off their stock of
TBI spacer plates for $25, for those not wanting to make their own.  Don't
know anything about the type or quality.  They are listed in their garage
sale section on the web page.
Steve

-----Original Message-----
From: Todd Burkard [mailto:toddburkard@pcmc.com]
Sent: Friday, June 30, 2000 1:58 PM
To: gmecm@diy-efi.org
Subject: Re: TBI SPACER ?


Well I did just about everything everyone suggested and I ended up with
taking the Spacer off and having the performance return. The thing worked
great on the 88 I had but for some reason this 94 just didn't like it. The
only thing I didn't try was messing with the chip (need to figure out the
327 project first before I touch the daily driver and the girlfriend would
kick my A$% if I mess up the truck).

Thanks again everyone for the suggestions,
Todd

>>> Chipsbyal@aol.com 06/27/00 12:18PM >>>
Look for the tan wire under the glove compartment. If the timing is correct,

try taking the spacer back off, expecting normal performance to return. If
it 
doesn't find out why before reinstalling the spacer.
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org