Re: Another Newbie Question, part II

["Bruce Plecan" <nacelp@bright.net>]

JIM:
And your point is?
Grumpy


----- Original Message -----
From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
To: <gmecm@diy-efi.org>
Sent: Wednesday, July 19, 2000 4:32 PM
Subject: Re: Another Newbie Question, part II


> Bruce,
>     A gentleman from the Monte list essentially explained to me how to
wire
> the factory harness to my car.  He has performed at least twenty such
> conversions and worked with a few aftermarket harness'.  He swears by
> factory harness' and when he has had to use the aftermarket he has spent
> more time repair them than if he would have just started with a factory.
A
> used factory harness is a lot cheaper than an aftermarket harness anyway.
>
> Jim Brady
> '87 Monte SS 383 TPI 6 speed
>
> >
> > > The suggestions involve getting parts from a used parts place and
> adapting
> > > it to my current engine?
> >
> > Yes, and armed with good information, it gets easy.  Have you down
loaded
> > the archives, and sone much reading?.
> >
> >   Is this correct, I got lost in some of the
> > > technical language.  How about "kits" from Affordable, Edlebrock,
> Howell,
> > > etc; any comments on these companies?  Thanks.  Charles
> >
> > Gm spends about 1.23984837459388748399   Bazillion dollars a year in
> wiring
> > harnesses, and R+D.  How much ya think these guys spend for R+D,  couple
> > afternoons?.  For further details please feel free to read hte archives
> > Grumpy
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org