Re: Needed to measure AFR

["alexpeper" <alexpeper@email.msn.com>]

6:1 for cold start and warm up.
Alex
----- Original Message -----
From: Greg Hermann <bearbvd@cmn.net>
To: <gmecm@diy-efi.org>
Sent: Saturday, August 19, 2000 11:54 PM
Subject: Re: Needed to measure AFR


> At 12:00 AM 8/20/00, Bruce Plecan wrote:
> >What range of AFR is really used in a common EFI engine
> >I'd think 15.5:1 to 11.5:1 would have to cover the
practical limit,
> >yes-no?..
> >For conventional engines.
> >Bruce
>
> I would say go up to 16.5 or 17 to 1---this lean is useful
for lean cruise.
> Otherwise fine.
>
> Greg
>
>
> ----------------------------------------------------------
------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm"
(without the quotes)
> in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
>



----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org