[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Home Dyno

To: gmecm@diy-efi.org
Subject: Re: Home Dyno
From: Doug Dayson <djdayson@home.com>
Date: Mon, 01 May 2000 13:34:00 -0700
References: <Pine.BSI.3.95.1000501132935.244A-100000@horizon.hit.net> <004901bfb3a8$5a3eb580$2e57503f@pii333home> <001f01bfb3a9$6550eaf0$b3320a0a@ttiinc.com>
Reply-to: gmecm@diy-efi.org
Sender: owner-gmecm@lists.diy-efi.org

Haven't used that one...but I have found Pat Hale's (RSA Software) Engine Jr
and Engine Sr to be reasonably accurate (plus or minus 5%...NA only) if you
have aoptiized exhaust set-up and reasonable inlet charge temps...

Doug

Craig Marcho wrote:
> 
> Has anyone here ever used the 'Home Dyno' program by Mike Chaney?
> 
> Do you feel it's accurate?
> 
> Any opinions?
> 
> Craig M.
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org

Follow-Ups:
- Re: Home Dyno
  - From: Roger Heflin <rah@horizon.hit.net>

References:
- Re: '90 Calpaks and PROMs
  - From: Roger Heflin <rah@horizon.hit.net>
- Re: '90 Calpaks and PROMs
  - From: "TRAX" <trax@frederickmd.com>
- Home Dyno
  - From: "Craig Marcho" <test@airmail.net>

Prev by Date: Re: 400 sbc in place of 350, 747 ecm
Next by Date: Re: Running a 305 with '747
Previous by thread: Home Dyno
Next by thread: Re: Home Dyno
Index(es):
- Date
- Thread