[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tuning a 727 or 730 with a Supercharger



Do we have archives past 12/99 now?  If so can you direct me to them?
Thanks.

Dan
----- Original Message -----
From: "Bruce Plecan" <nacelp@bright.net>
To: <gmecm@diy-efi.org>
Sent: Tuesday, July 11, 2000 4:49 PM
Subject: Re: Tuning a 727 or 730 with a Supercharger


> Back about Mar 2000,
> John Gwynne posted how to change the eprom over to a 2 bar Map, and add a
> Baro input to a 730
> Grumpy
>
>
> > Sorry the previous post had wrong header
> >
> > > Anyone done any 727 or 730 programming with a Centrifugal
supercharger?
> I
> > > just picked up a Paxton SN92 to use on my 61 Corvette. I have 1991
> > Corvette
> > > aluminum heads that have been pocket ported, 1991 Corvette FI setup,
no
> > EGR
> > > no AIR. Headman Headers, no CATs, 2inch exhaust pipes back of
> collectors.
> > 10
> > > to 1 CR. 4.11 posi in the rear and a T-56 6 speed tranny. 125hp
> powershot
> > > nitrous plate system. I am using TunerCat and the 8D tdf. No
intercooler
> > or
> > > water injection yet. Comments and suggestions welcome.
> > >
> > > Dan Plaskett
> > >
> >
>
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org