Re: single vs double batch fire

[romans@starstream.net (Romans, Mark)]

How do you know?  Just curious.  The option in the air fuel words just says
double or single mode.
Mark
----- Original Message -----
From: "Mike Rolica" <mrolica@meridian-mag.com>
To: <gmecm@diy-efi.org>
Sent: Thursday, August 10, 2000 10:58 AM
Subject: RE: single vs double batch fire


> The bin I'm currently using uses single fire for low bpw..... when bpw
gets
> so low it switches to single fire..
> Gonna play with it when I throw the 30lb injectors.
> Mike Rolica
> Plant A,
> Magnesium Products Division
> Strathroy
>
> (519)-245-4040  Ext. 244
>
>
>
> -----Original Message-----
> From: romans@starstream.net [SMTP:romans@starstream.net]
> Sent: Thursday, August 10, 2000 12:57 PM
> To: gmecm@diy-efi.org
> Subject: Re: single vs double batch fire
>
> Looking some bins and the air fuel mode words, working on a
> different
> problem i have found  that (89 Code) only the 305 5 speed bin uses
> the
> single fire mode.  All other F&Y body bins that I have looked at use
> double
> fire mode.
> Mark
> ----- Original Message -----
> From: "NickG" <nikog@mediaone.net>
> To: <gmecm@diy-efi.org>
> Sent: Thursday, August 10, 2000 9:03 AM
> Subject: single vs double batch fire
>
>
> > ECM in question: '165 with type 32 Prom
> >
> > What is the difference between single fire and double fire on the
> injectors?
> > I've noticed that the eprom has an injector size value for each of
> these
> > instances. Should these values always be the same? At what point
> does the
> > ECM switch from one mode to the other?
> >
> > If it works like I imagine, I would like to set the low-speed
> injector
> > sizing to open the injectors for a smaller amount of time, and the
> > high-speed sizing to something that will open the injectors
> longer. Will
> > this work?
> >
> > Thanks,
> > Nick
> >
> >
> >
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> >
> >
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org