Re: 747 & 4cyls

["Bruce Plecan" <nacelp@bright.net>]

AUJN
Looks like a good one to start with,
Sorry I don't have a bin for it, anyone?
If someone does may I get a copy?
Bruce

> I also have a bin file using the 8D template on a 4 cyl engine.  I have
> much tunning to do before I consider the conversion complete, but
> at least I have the beast running(considering I was having trouble
> with the code not to long ago). If anyone would like to see this bin
> file, let me know off list and I will send you a copy.  BTW, it is for a
> 79 1.7 litre Dodge OMNI with a manual trans.  I would like to have a
> manual 8D bin instead of the auto bin I am currently using (AUJP) if
> anyone has one.
>
> On 24 Aug 2000, at 8:21, Mike Rolica wrote:
>
> >
> > Mike Rolica
> > Plant A,
> > Magnesium Products Division
> > Strathroy
> >
> > (519)-245-4040  Ext. 244
> >
> >
> >
> > -----Original Message-----
> > From: Garfield Willis [SMTP:garwillis@msn.com]
> > Sent: Tuesday, August 22, 2000 6:46 PM
> > To: gmecm@diy-efi.org
> > Subject: Re: 747 & 4cyls
> >
> > On Tue, 22 Aug 2000 15:37:09 -0400, "Bruce Plecan"
> > <nacelp@bright.net>
> > wrote:
> >
> > >The 730 and 165 have been used in single injector TBIs, but no hacs
> >
> > Okay, yeah what would be ideal is an ecm with a TPI mode suitable
> > for
> > 4-cyl, AND that had been fully hac'd. You mean to tell me no such
> > animal yet??? Shriek, gnash, argh, whimper!
> >
> > >For the 4 cylinder distributor set up the syclone code, might be a
> > good one
> > >to look at.
> >
> >
> >
> > <snip>
> >
> >
> > um  I got a bin file here that I used on a 4cy port injected 16v vw
> > motor.. it is a distributor setp and uses the 730 ecm...
> >
> > like bruce said , it is being tried to use a dis setup... iv'e
> > managed to get a z24 caviler to run half assed on it ( usind the fully
> > hacked 8d template) and patching in code from the original azsm dis
> > code......alas I have to get the chip back from my friend so I can get
the
> > bin file from it as I lost allot of work when my computer tried to float
> > away awhile ago....
> >
> > It has been on hold lately since the truck blew a head gasket......
> >
>
> --------------------------------------------------------------------------
--
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
> >
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org