[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

What model ECM is this ?

To: gmecm@efi332.eng.ohio-state.edu
Subject: What model ECM is this ?
From: Team ZR1 <teamzr1@teamzr1.com>
Date: Fri, 14 Jan 2000 21:06:24 -0800
Organization: http://teamzr1.com
References: <f3.1ce55d.25b07fc8@aol.com> <387F2DD2.ED09D127@bellsouth.net> <00a001bf5edd$4271c980$3f0ac9d8@v1b1k1> <002201bf5ee0$9d72e0a0$385265cb@gsr> <387FA8AF.51530741@arm.com> <001401bf5f2e$e14e4280$7146e2d8@mjohnson2>
Reply-to: gmecm@efi332.eng.ohio-state.edu
Sender: owner-gmecm@esl.eng.ohio-state.edu

Hi,
     I have just started getting into this and am green as you can be ...

The ECM in my Snakeskinner ZR-1 Corvette has these numbers on the PCB towards
the end where E-prom sits.

By barcode : 309023101908316

Corner of PCB is : IE315 P-5

More towards center : 61C315 P-8 ( I think its an 8 )

So which model is it, what processor does it use ?

Also I downloaded this disassembler off of the TunerCat website and I can not
tell if its disassembling correctly.
Which proocessor do I choose and is there any thing I have to change in the
setup screen ?
Can I tell if the output code is correct ?

Thanks,
             John Rovner

Follow-Ups:
- Re: What model ECM is this ?
  - From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
  - From: Ludis Langens <ludis@cruzers.com>
- Re: What model ECM is this ?
  - From: Scot Sealander <Sealand@clarityconnect.com>

References:
- Re: Memcals
  - From: JTesta1966@aol.com
- Re: Memcals
  - From: Swayze <kswayze@bellsouth.net>
- Re: Memcals
  - From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcals
  - From: "Geoff Richards" <gerich@one.net.au>
- Re: Memcals
  - From: steve ravet <sravet@arm.com>
- Re: Memcals
  - From: "Dave Zug" <dzug@delanet.com>

Prev by Date: Re: Memcals
Next by Date: Re: What model ECM is this ?
Previous by thread: Re: Memcals
Next by thread: Re: What model ECM is this ?
Index(es):
- Date
- Thread