Re: re-calibration software

["Phil Rickard" <vettebuilder@skyenet.net>]

Thank you Bruce for your time:-)

Regards...

Phil Rickard- Engine builder/Tuner for Les Stanford-Pirate Racing Corvette
C5R......Formerly with L.P.E.
----- Original Message -----
From: Bruce Plecan <nacelp@bright.net>
To: <gmecm@diy-efi.org>
Sent: Tuesday, August 01, 2000 1:54 PM
Subject: Re: re-calibration software


>
>
>
> > Just a quick question. What is the software "Programmer"
>
> Promgrammer, available at www.syty.org
>
>  and "GMEpro"
>
> Terryk@foothill.net
>
> www.tunercat.com
>
>  that
> > you guys refer to on occasion?
>
> They are sources of editing software for the various gm ecms.  There are a
> host of different programs and each application (darn near), needs a
> specific editor.
> Grumpy
>
>
>
> Thanks for your time.
> >
> > Regards.....
> >
> > Phil Rickard- Engine builder/Tuner for Les Stanford-Pirate Racing
Corvette
> > C5R......Formerly with L.P.E.
> > ----- Original Message -----
> > From: Bruce Plecan <nacelp@bright.net>
> > To: <gmecm@diy-efi.org>
> > Sent: Wednesday, July 05, 2000 11:19 PM
> > Subject: Re: Mandatory TC Lockup
> >
> >
> > > I don't know about anyone else, but I've forgotten what Mask ID /
> > > application your working one.
> > >
> > > > Remember my discussion earlier about the mandatory TC lock up at
> approx.
> > > > 80mph.  I've heard through the grapevine that GMEPro can change this
> > > lockup
> > > > point.  Is that true?!?
> > >
> > > The editors all vary some from application to application, so you have
> to
> > be
> > > specific.
> > >
> > >   I didn't think that there were any programs
> > > > currently on the market that could actually change values contained
in
> > the
> > > > GM 'program' in the other half of the BIN.
> > >
> > > Promgrammer allows changes for the whole  (749) "bin"
> > > GMEPro gets real close to that in some applications
> > > Tunercat also varies some by application
> > > There is some old editors that also allowed for major tuning, like the
> > > Fueltronics 808 stuff.
> > >
> > >   I know that neither TunerCat nor
> > > > WinBin can do it.  I wouldn't think that GMEPro could do it either
> since
> > > > this value doesn't seem to be in the .ecu file.
> > >
> > > Each offering generally has it's strong and weak points, and that can
> even
> > > vary by application.  There is a huge amount of work that goes into
> hacing
> > a
> > > bin into what a editor needs, and at times they just have to stop.
> > > Grumpy
> > > >
> > > > Thanx in advance,
> > > > Tim
> > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > --
> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > > in the body of a message (not the subject) to
> > majordomo@lists.diy-efi.org
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org