Mail Thread Index
- Re: MAFs,
Bruce Plecan
- Re: Update: Closed Loop Disable in $6E,
Shannen Durphey
- TBI injector picture and info,
steve ravet
- Re: Need help in NH,
Chipsbyal
- Re: EFI POWWOW,
Jeremy Gonyou
- Re: 383 TPI Dyno runs,
timsiford
- Re: another 'tuning' suggestion...,
Edward J. Malkiewicz
- Re: 1228746,
Ludis Langens
- GM 808 .ECU file for VN/VP,
Glenn D
- '94 Jimmy 4.3L and Diacom,
Marteney, Steven J.
- Re: Plena volume,
Dig
- Re: TBI injectors,
ae2598
- HELP VN WRONG POLARITY!,
Wes Branchflower
- Running 8 low impedence injectors on GM ECM using an auxilliary injector driver?,
Jason R. Haines
- Re: T56 Questions... was : Re: Document re-uploaded,
Jim and Sharon Brady
- Harness?,
Rex Weatherford
- Interesting bulletin regarding O2 + exhaust,
Shannen Durphey
- Re: TBI injectors (just humor),
Shannen Durphey
- Re: Running 8 low impedence injectors on GM ECM using an auxilliary injector ...,
ECMnut
- GM TPS to Ford throttle body,
Glenn D
- Re: GMECM Digest V2 #780,
Dig
- Cheap Shift Light,
Rex Weatherford
- Knock Sensor Light and Alarm problems...,
Rex Weatherford
- The count is in...,
Andrew McRory
- RE: 165 ECU File,
Marteney, Steven J.
- Re: 165 ECU File,
Dan Townsend
- <Possible follow-ups>
- RE: 165 ECU File,
Marteney, Steven J.
- RE: 165 ECU File,
Marteney, Steven J.
- RE: 165 ECU File,
Marteney, Steven J.
- RE: 165 ECU File,
Marteney, Steven J.
- RE: 165 ECU File,
Marteney, Steven J.
- RE: 165 ECU File,
Marteney, Steven J.
- ECM for '95 5.7 Yukon?,
Reid Bishop
- ecm test bench,
Daniel Collins
- 165 $6E MAF scalar,
Marteney, Steven J.
- Intronics Emulator,
Mark S. Riley
- Need help,
lunapark
- Re: Diacom didn't work on another car....,
Ross Myers
- AKFM in 730,
Tom Marracci
- Eprom Programmer and Pic Programmer,
Peter Fenske
- Re: tbi injector install question,
WEG1192
- Injector ID help please,
Andrew McRory
- '88 Corvette Binary & Archives,
Scott Fraser
- Halp BBC Tuned port manifold,
Peter Fenske
- Remote EPROM,
sapearso
- Re: Remote EPROM,
Bruce Plecan
- <Possible follow-ups>
- Re: Remote EPROM,
Christian Hack
- Re: Remote EPROM,
Scott Pearson
- Blown 350 with 1227730 ECM,
Dan Townsend
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
chetwagner
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- Re: Blown 350 with 1227730 ECM,
Jon Fedock
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
Jon Fedock
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
Ludis Langens
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- ECM 1227748, creating a new ECU file?,
Nick McAlpin
- Re: ECM 1227748, creating a new ECU file?,
Bruce Plecan
- Re: ECM 1227748, creating a new ECU file?,
Romans, Mark
- Re: ECM 1227748, creating a new ECU file?,
steve ravet
- Re: ECM 1227748, creating a new ECU file?,
Nick McAlpin
- Re: ECM 1227748, creating a new ECU file?,
TK
- Re: ECM 1227748, creating a new ECU file?,
Nick McAlpin
- Re: ECM 1227748, creating a new ECU file?,
steve ravet
- Re: ECM 1227748, creating a new ECU file?,
Nick McAlpin
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- Re: Blown 350 with 1227730 ECM,
rr
- Re: Blown 350 with 1227730 ECM,
Jon Fedock
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
TK
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- Re: Blown 350 with 1227730 ECM,
Jon Fedock
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- VE2 all zeros...?,
den Broeder, Ernst
- Re: VE2 all zeros...?,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
chetwagner
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- Re: Blown 350 with 1227730 ECM,
Jon Fedock
- Re: Blown 350 with 1227730 ECM,
Jon Fedock
- Re: Blown 350 with 1227730 ECM,
Programmer
- Re: Blown 350 with 1227730 ECM,
Jon Fedock
- 165 $6E cold idle,
Marteney, Steven J.
- Cherry Semiconductors Group buy,
Bruce Plecan
- Re: Looking for a date for the gmecm eeprom,
Ludis Langens
- Re: Donor found!,
Ludis Langens
- Fw: checking up,
Bruce Plecan
- Fw: The Revolutionary BXR Manifold!,
Bruce Plecan
- Re: Next round of viruses?,
LSINGH46
- Re: Blown 350 with 1227730 ECM,
ECMnut
- Re: Blown 350 with 1227730 ECM,
Dan Townsend
- <Possible follow-ups>
- Re: Blown 350 with 1227730 ECM,
Bill Shaw
- Re: Blown 350 with 1227730 ECM,
rr
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
ae2598
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
ae2598
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
ae2598
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
ae2598
- Re: Blown 350 with 1227730 ECM,
Shannen Durphey
- Re: Blown 350 with 1227730 ECM,
rr
- Re: Blown 350 with 1227730 ECM,
Bruce Plecan
- Re: Blown 350 with 1227730 ECM,
ECMnut
- RE: Blown 350 with 1227730 ECM,
jkooser
- Re: Blown 350 with 1227730 ECM,
ECMnut
- Re: Blown 350 with 1227730 ECM,
Meister Brau
- '165 Minimum Air Question...,
OneSS2NV
- Re: '165 Minimum Air Question...,
Dan Townsend
- Re: '165 Minimum Air Question...,
Shannen Durphey
- Re: '165 Minimum Air Question...,
Kevin Crain
- <Possible follow-ups>
- Re: '165 Minimum Air Question...,
Bob Wooten
- Re: '165 Minimum Air Question...,
Programmer
- Re: '165 Minimum Air Question...,
Bob Wooten
- Re: '165 Minimum Air Question...,
Bob Valentine
- Re: '165 Minimum Air Question...,
Bob Wooten
- Re: '165 Minimum Air Question...,
Bob Wooten
- Re: '165 Minimum Air Question...,
Bob Wooten
- Howell RPM reference,
WEG1192
- VSS buffer location,
Bob Valentine
- Near WideBand O2 sensory (Greddy),
timsiford
- GM 747 EPROM,
Jove Malcolm
- Emulator + Editor ?????,
Walter Sherwin
- About the greedy WB,
Bruce Plecan
- Re: VSS and idle,
Tedscj
- Re: GMECM Digest V2 #792,
sapearso
- Re: '165 Minimum Air Question...(Round 2),
OneSS2NV
- Mysterious black box id...,
Shannen Durphey
- EGOR, was:Re: GMECM Digest V2 #792,
rrauscher
- A standard defition format for ECMs, with LT1 as an example,
Dave Plummer
- beginners info,
DianeS
- <Possible follow-ups>
- Re: A standard defition format for ECMs, with LT1 as an example,
timsiford
- Re: A standard defition format for ECMs, with LT1 as an example,
ECMnut
- Re: A standard defition format for ECMs, with LT1 as an example,
timsiford
- RE: A standard defition format for ECMs, with LT1 as an example,
Marteney, Steven J.
- RE: A standard defition format for ECMs, with LT1 as an example,
Dave Plummer
- piston identification,
DianeS
- Re: s-10 idle ( was '165 Minimum Air Question...),
BogHog1
- Off topic: Injectors Wanted,
Jeremy Gonyou
- Information on EFI Org,
Joseph & Melissa Guthrie
- P4 ECM #1227748 questions,
Nick McAlpin
- ecu files for a TR 1227148 ECM?,
Drew Skinner
- ALDL link, carbytes?,
Nick McAlpin
- Removing A/C from a 730 vehicle,
timsiford
- RE: A standard defition format for ECMs, with LT1 as an exampl,
Marteney, Steven J.
- dats a lotsa bins!,
steve ravet
- Re: A standard defition format for ECMs,
Paul Blackmore
- Bin Library,
Gabe
- Remember trace detonation, headgaskets and bearings,
KasaRyan
- Profiteers,
Bruce Plecan
- Later MAFs,
Bruce Plecan
- Lockers update,
rr
- Earnhardt past away,
ECMnut
- Adjustable VSSB,
BogHog1
- Re: Adjustable VSSB,
Shannen Durphey
- Re: Adjustable VSSB,
Shannen Durphey
- <Possible follow-ups>
- Re: Adjustable VSSB,
Bob Valentine
- Re: Adjustable VSSB,
BogHog1
- Re: Adjustable VSSB,
BogHog1
- Re: Adjustable VSSB,
BogHog1
- Re: Adjustable VSSB,
EK
- Re: Adjustable VSSB,
Daniel Collins
- Re: Adjustable VSSB,
Daniel Collins
- Re: Adjustable VSSB,
BogHog1
- intermittent '747 problem,
Marc Piccioni
- Emulators, EconoRom III,
Mark S. Riley
- Retiring Dale Earnhardt's Number Three,
jkooser
- diy-egor,
rr
- Fw: more on netres,
Bruce Plecan
- 94 Buick LeSabre ALDL Pinouts,
Mikepoore
- Suitable Cross for the Cherry drivers?,
DC Smith
- Hondo WB O2 and PCV valve,
Bruce Plecan
- Pic driven UEGO,
The Punisher
- Accel Linear O2 sensor,
DC Smith
- 747 newbie question,
Brian Hourigan
- Re: Hondo WB O2 Pinout,
bcroe
- Re: anyone have any runners ?,
Marc Piccioni
- RE: [73-87Chevy/GMCTrucks]Vortechs, TBI, and Edelbrock too...oooouu,
Jake Kooser
- RPM limits of GM computer/ignition module?,
Christopher Bennight
- Re: RPM limits of GM computer/ignition module?,
Bruce Plecan
- Re: RPM limits of GM computer/ignition module?,
Kevin Crain
- Re: RPM limits of GM computer/ignition module?,
Christopher Bennight
- Re: RPM limits of GM computer/ignition module?,
Shannen Durphey
- Re: RPM limits of GM computer/ignition module?,
Ludis Langens
- Re: RPM limits of GM computer/ignition module?,
Andrew K. Mattei
- Re: RPM limits of GM computer/ignition module?,
Christopher Bennight
- Re: RPM limits of GM computer/ignition module?,
Nick McAlpin
- Re: RPM limits of GM computer/ignition module?,
Ludis Langens
- Re: RPM limits of GM computer/ignition module?,
Christopher Bennight
- Re: RPM limits of GM computer/ignition module?,
TK
- Re: RPM limits of GM computer/ignition module?,
Shannen Durphey
- Re: RPM limits of GM computer/ignition module?,
TK
- Re: RPM limits of GM computer/ignition module?,
Gerald Pelnar
- Re: RPM limits of GM computer/ignition module?,
Bruce Plecan
- Re: RPM limits of GM computer/ignition module?,
Eric Clark
- Re: RPM limits of GM computer/ignition module?,
Programmer
- <Possible follow-ups>
- RE: RPM limits of GM computer/ignition module?,
rahmrh
- RE: RPM limits of GM computer/ignition module?,
Eric Bryant
- Fwd: Re: RPM limits of GM computer/ignition module?,
Dale Klein
- CS453 group buy,
Marc Piccioni
- Update: $6E CL Disable and Idle,
Marteney, Steven J.
- 1227148 to 1227749 conversion?,
Drew Skinner
- Re: 1227148 to 1227749 conversion?,
Bruce Plecan
- <Possible follow-ups>
- Re: 1227148 to 1227749 conversion?,
ECMnut
- Re: 1227148 to 1227749 conversion?,
Drew Skinner
- Re: 1227148 to 1227749 conversion?,
Drew Skinner
- Re: 1227148 to 1227749 conversion?,
Drew Skinner
- Re: 1227148 to 1227749 conversion?,
ECMnut
- Re: 1227148 to 1227749 conversion?,
ECMnut
- Re: 1227148 to 1227749 conversion?,
Dan Townsend
- Vette injectors FS,
ae2598
- 1227730 with 2 bar Map?,
Dan Townsend
- Re: 1227730 with 2 bar Map?,
Bruce Plecan
- some table locations I found within 1227429 ECM prom,
den Broeder, Ernst
- Re: some table locations I found within 1227429 ECM prom,
den Broeder, Ernst
- Re: some table locations I found within 1227429 ECM prom,
Shannen Durphey
- Re: 1227730 with 2 bar Map?,
John S. Gwynne
- Re: 1227730 with 2 bar Map?,
Ludis Langens
- application info?,
den Broeder, Ernst
- Re: application info?,
Bruce Plecan
- Re: application info?,
den Broeder, Ernst
- Re: application info?,
Shannen Durphey
- Re: 1227148 to 1227749 conversion?,
rr
- Re: 1227148 to 1227749 conversion?,
Dan Townsend
- Re: 1227148 to 1227749 conversion?,
Shannen Durphey
- Re: 1227148 to 1227749 conversion?,
rr
- Re: New way to tune GM VE tables?,
Dave Zug.
- Re: GMECM Digest V2 #807,
Tom Marracci
- RE: 1227730 with 2 bar Map?,
Bob Wooten
- MAF with 747? 730? or any other later ecm?,
Brandon
- Mystery O2 sensor,
The Punisher
- 2732A EPROM problem,
WEG1192
- 16168625 ECM,
Dave Williams
- lean cruise,
rr
- Mechanical end of K/S tests,
Bruce Plecan
- Felpro 1010s,
Bruce Plecan
- Helpful suggestion,
Shannen Durphey
- felpro 1010s and 8625 software,
KasaRyan
- 98 Vs 94 4L60E,
washburn
- Manual Idle tweaking,
Ross Myers
- TPI fuel pressure,
Marteney, Steven J.
- Re: TPI fuel pressure,
slowfatslug
- <Possible follow-ups>
- RE: TPI fuel pressure,
Marteney, Steven J.
- RE: TPI fuel pressure,
Marteney, Steven J.
- Re: TPI fuel pressure,
Bja1078
- RE: TPI fuel pressure,
Marteney, Steven J.
- RE: TPI fuel pressure,
inter7
- RE: TPI fuel pressure,
inter7
- RE: TPI fuel pressure,
inter7
- AANL4045 bin,
Ludis Langens
- Turbo Selection,
chetwagner
- Programmers and emulators,
Drew Skinner
- recommended eprom speeds,
Chris Abreu
- ARW cal - 1227429 or 1228062 ECM?,
Bob Valentine
- Duty Cycle Calculation,
Bob Valentine
Mail converted by MHonArc 2.6.11